Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 6 of 6 Posts

·
Registered
Joined
·
1,541 Posts
Discussion Starter #1
The 3 triangles in the fender lip where it bolts to the apron on the left side was bothering me as the right side don’t have them so I figured I would show how I removed them..
First cut a slot in the center all the way back to the edge.
then with a hammer and a Dolly hammer it flat and the slot you made will almost close up..
then mig weld the slot
grind carefully not to grind off to much of the fender
then prime.. 8FD0462E-AB72-4F44-83D9-6FA870591A8B.jpeg 68F8B427-6322-460E-8FBF-2CB7688A6BCE.jpeg FDBE6F53-553A-436D-B7EF-99B9875877FA.jpeg A971A433-2B63-4731-98B3-7DC34D13CDF8.jpeg
looks much better and now match’s the right side..
Just trying to help other here with some ideas..(y)
 

·
Premium Member
Joined
·
13,231 Posts
1 - 6 of 6 Posts
Top