Leg ROOM
1 - 3 of 3 Posts
Joined
·
3,961 Posts
One thing people do is to lower the seat mount plate in the car.
A shop (or yourself if you have the tools) will take out the double
floor, fold up the edges and re-install it to make the seat sit lower.
Mustangs Plus has a "how to" on there web site about it.
Good Luck!
A shop (or yourself if you have the tools) will take out the double
floor, fold up the edges and re-install it to make the seat sit lower.
Mustangs Plus has a "how to" on there web site about it.
Good Luck!
Joined
·
6,807 Posts
Another possiblity is to fix it like Ford did. They relocated the seat rearward. with the help of a couple of holes and two small brackets.
Email me directly and I'll send back a copy of the technical bulletin
Jeff Speegle
MCA Shelby Gold Card
www.geocities.com/MotorCity/6473/
Mustang & Shelby research, documentation, and help.
Where sharing with one .. means sharing with all
Email me directly and I'll send back a copy of the technical bulletin
Jeff Speegle
MCA Shelby Gold Card
www.geocities.com/MotorCity/6473/
Mustang & Shelby research, documentation, and help.
Where sharing with one .. means sharing with all
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
4 lug Scarebird disc brakes
Vintage Mustang ForumHell, Just wondering if anyone on this site uses or have used Scarebird disc brake conversion on their 6 cylinder Mustang. I am thinking of doing this, but have questions about if the stock 14 inch steel wheels will clear the calipers. The Scarebird site states if the offset is more than 3...- 20
- 276
-
A/C Console Hardware
Vintage Mustang ForumI have bought and redone an original A/C console for my '66 coupe. I have the 6 screws that mount the plastic base. I need the 2 screws for the end cap and 1 for the shifter plate. I bought a pack of #8 3/8" screws and currently using one for the shifter plate. Different head but works. I have...- 2
- 76
-
Subframe connector installation question
Vintage Mustang ForumI’m going to get them welded on but have a bolt-on kit I’m installing right now. The rear is supposed to attach via a threaded hole on the rear subframe. Due to being 50 years old I assume, the holes don’t align between the connector and subframe. The subframe hole is shifted about 1/2” towards...- 9
- 324
-
Brake booster question, which one?
Vintage Mustang ForumI was going to stay manual brakes but since my engine is out and I am adding borgeson steering I've decided to go with power brakes. Up front I have Wilwood discs and on the rear I have 2003 Cobra disc brakes mounted to Mustang Steve brackets. I also have a Wilwood adjustable proportioning...- 1
- 64
-
mikec35 · updated
-
Too hot to work on the Mustang, so I improvised.
Vintage Mustang ForumIt’s about 100 degrees here in sunny North Texas. Feels even hotter. We’ve got too much to do on my daughter’s car, so it’s time to get creative. I would have gotten a single larger unit, but my in-laws had these two 5,000btu units new in the box, so I’m giving them a test drive. After an hour...- 27
- 488
-
BlakeTX · updated
Join now to ask and comment!