G
Guest
·Guest
Joined
·
0 Posts
I need a Light Switch retaining bolt for a 65 conv. This is the 3" long bolt that holds the bezel to the dash and screws into the switch on the other side of the dash.
Light Switch Retaining Bolt
Join the discussion
Recommended Reading
-
Fishing for a response in a different forum
Vintage Mustang ForumPosted this in Mods and Customs - throwing out here to see if any one can help me out. Preface: I spent the better part of Saturday reading through about 19 pages of posts about this subject. Didn't quite find what I was looking for. Project: Installation of 3 point retractor belts in rear...- 12
- 314
-
John_in_SC · updated
-
best shock option for occasional driven 1967 mustang convertible
Vintage Mustang Forumlooking to replace my 13 year old shocks with something that would look like originals and give me the best ride. any suggestions appreciated. gas or oil filled and manufacturer.- 11
- 210
-
Intake manifold options
Vintage Mustang ForumHI Situation : 66 HT 289 2100v stock. I have a 68 302 4BBL intake and newer 600 cfm Holley carb. Do I purchase an aluminum intake or use the old one? If I replace the intake which do you recommend. O- 5
- 136
-
oscarnielsen · updated
-
LED Headlights
Vintage Mustang ForumHas anyone ungraded to LED headlights? (Full LED, not just the halo) How was your experience? I currently have sealed beam Halogens and don't know whether to upgrade. Pros and cons?- 11
- 174
-
umangu · updated
-
1966 Mustang 289 - perplexing starting issue after car gets hot
Vintage Mustang ForumLooking for some help, thanks in advance. I am encountering a very interesting issue. I have a new battery, voltage regulator, solenoid, battery terminal ends; and the problem persists. Car will start and run fine and I take it out and get it to operating temps. Then when I get home and turn...- 10
- 176
Join now to ask and comment!