Vintage Mustang Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,676 Posts
Discussion Starter #1
Hi guys,

I am hoping someone has the measurement I need. I don't yet have a hood for my car...what I am looking for is a hood clearance measurement on the stock hood...referenced at the shock tower centerline...the distance from the top of the fender aprons to the center of the hood. I am trying to determine whether I will be able to get away with a stock hood or be forced to run some type of scoop.
 

·
Registered
Joined
·
6,149 Posts
The board is sitting on the shock towers, top edge is level with the fender apron top edge. I’m seeing about 3” gap to be safe. I’m slightly forward of your centerline, but it looks to be the same . Hope that helps..
 

·
Registered
Joined
·
1,676 Posts
Discussion Starter #5
Thank you! That will help a lot
 

·
Registered
Joined
·
1,993 Posts
Isn't this forum great? ! ! ! !

John
 
  • Like
Reactions: gt350sr
1 - 6 of 6 Posts
Top