Joined
·
239 Posts
MY STUPID AOL TOOK A CHEVY ON ME AND I LOST ALL MY SITES, CAN SOMEONE HELP ME FIND CYCLONES 427 DRAG RACING? I AM PLANNING AN AFX CLONE PROJECT AND THERE ARE GREAT PERIOD PICS THERE....THANKS
LOST COOL SITE (HELP!)
Join the discussion
Recommended Reading
-
67 S Code 390 need some help
Vintage Mustang ForumLong time owner of a 67 390 gt 4 speed fastback. It's been a very reliable runner for 20 plus years, but the past 6 or 8 months i've developed an issue which i need some input if anyone has had any similar issues. Seems in warm weather like now in the midwest, after the car has run for maybe 10...- 23
- 350
-
Engine screeching noise and then stall
Vintage Mustang ForumI recently rebuilt my 67 mustang inline 6. yup, I did it. I have not been able to drive the car yet due to it stalling. I need some advise on what it might be. I rebuilt the engine from the ground up, inside and out. I also have new fuel pump, fuel filter, alternator, starter, ignition...- 78
- 3K
-
jaredlgoldman · updated
-
How to remove Paint on vinyl seat
Vintage Mustang Forumrecently, my car had some body work done. The car looks great, but there appears to be some overspray on the rear vinyl seat and part of the new seat belt straps (5 years old). The overspray isn’t a huge amount but is noticeable, Does anyone know how to remove the paint from teh vinyl seat and...- 0
- 0
-
capemustang · updated
-
Wow!!! I finally upgraded to 3.55 gear ratio
Vintage Mustang ForumOver the July 4th weekend I finally upgraded from a 3.00 to 3.55 gear ratio and I love it. With my 90-93 T5, I'm cruising at 70 MPH (approx. 2200-2300 RPM). I'm a weekend cruiser and I've put about 200 miles total on the build (15-25 miles short easy trips at a time) Since I like to take...- 27
- 555
-
jcsinc · updated
-
Advise on rear fender...
Vintage Mustang ForumHi guys, I know it's been discussed if one should roll or cut/trim the rear fender. I added 275/35/17 on my rear and today I realized there's a crack on the fender... Not sure if I should roll it or just cut it... I feel like its easier to cut a portion of it then roll some areas. I tried...- 8
- 199
-
mikemercado34 · updated
Join now to ask and comment!