G
Guest
·Guest
Joined
·
0 Posts
has anyone ever had their oval eccentrics slip on them? has anyone ever used pro-motor sports eccentric eliminator kit? does it work well?
lower control arm eccentric
1 - 3 of 3 Posts
Joined
·
2,596 Posts
It is an almost universal problem. The Pro Motorsports eccentrics have squared off edges - so they do not slip. Many road racers have used them for years because of the fact that they maintain your camber adjustment - no matter how rough the track surface.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Fuel Level In Holley 4150 SS Double Pumper 1967 Fastback w/ 347
Vintage Mustang ForumI have been trying to tune my Holley carb for a while now. My dad had passed away and had given his 1967 Fastback with a 302 bored over to a 347 to me. He always said that the carb was "too big" for the engine so it ran rich? As I am trying to tweak the fuel levels in the float bowl assemblies...- 5
- 70
-
JamesLee89 · updated
-
65 Mustang Collapsible Column Help for my Son
Vintage Mustang ForumI get the whole conversation about whether or not this is an important subject... I have several old cars with and without safety features; however, my son and I have been building a 65 coupe that he will be driving a good bit. He's high school age and he's my son so while I may not care that...- 14
- 307
-
Am I missing Something?
Vintage Mustang ForumI have 2 '65 Mustangs, Coupe and Conv. I believe I may sell one this spring. I was told the classic car hobby was fading and my cars value was getting lower.Then, I met a new owner of a '65 conv just like mine. (with less options). He paid $28k !!! I checked Hemmings to see if I was dreaming...- 11
- 210
-
how do you remove and install the passenger side front brake hard line?
Vintage Mustang Forumi am installing front disc brakes and a dual bowl (power) master on my '65 vert. i have pretty much everything under control EXCEPT the passenger side front hard line is causing me concern. i am going to make all new front hard lines so i was planning to remove the old lines and use them as a...- 1
- 35
-
New and need some advice
Vintage Mustang ForumJust bought a 65 hardtop mustang - without enough due diligence so I'm trying to unwind things a bit. It's pretty much original but....The carb is a 2 barrel but the car is a D code car so it should have a 4 barrel. What should I look to do - find an original or replace with something a little...- 14
- 243
Join now to ask and comment!