Vintage Mustang Forums banner

Maverick Brake Master Cyl Brake Lines: No adapters

5K views 14 replies 9 participants last post by  cougar70 
#1 ·
Just a little public service announcement for anyone using a Maverick brake master cylinder for disc/drum or disc/disc applications. I have run this master cylinder for 20 years and it works great both before and after Explorer 8.8 disc swap.

After much trial and error, I was able to identify two sticks of brake line that perfectly fit the various fitting sizes from the Maverick master to the distribution block and adjustable proportioning valve respectively. (Your milage may vary on the prop valve, but mine is from Summit and is branded Summit as well, though I think it's just a relabeled Wilwood part)

PAA-B410 1/4" line to 3/8" line 7/16"-24 to 9/16"-18
PAA-R340 3/16" line to 1/4" line 3/8" -24 to 7/16" -24

The brand is Poly Armor and I got it at Autozone, though it appears to be available lots of places online as well.

Bends nice and easily for a clean install and no adapters anywhere in the system.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top