Vintage Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,859 Posts
Discussion Starter #1
Several posts in the last few days prompted me back to the MegasSquirt Home Page and Support Forums. That in turn lead me to the Auto-Nomics site. No doubt many of you have been there before but... WOW! pretty much anything and everything you'll need to complete a custom EFI setup. How about this very stylish looking throttle body (to be used with 4 injectors or plugged for use with MPI).
http://www.auto-nomics.com/images/throt_body.jpg

At $75 Bucks it looks like a great deal. Lots of other parts on the site to finish the job.

- Gord
 

·
Registered
Joined
·
709 Posts
You know I was originally going to go with the mass-flo setup but I am really the do-it-yourself or F#ck-it-up kinda guy. Seeing the posts on this setup and the parts source you posted here has changed my mind. Now to go tell SWMBO - I'm sure she'll be very happy.

-Deric
 

·
Registered
Joined
·
3,038 Posts
What kind of air flow sensor would you use with this?
 

·
Registered
Joined
·
1,859 Posts
Discussion Starter #5
What kind of air flow sensor would you use with this?
You could use a "Speed Density" computer (MegaSquirt, for instance) which doesn't use a flow sensor. Alternatively, if you want "Mass Flow", you could use one of these air plenums ($70) to seal the throttle body...

http://www.auto-nomics.com/images/air_plen_tall.jpg
along with one of these Mass Flow Sensors. ($200)

http://www.auto-nomics.com/images/AMS_4in_analog.jpg

Just need to do a little scheming & dreaming. (I pulled these from the Auto-Nomics site but I'm sure there are other designs and sources.)

- Gord
 
1 - 5 of 5 Posts
Top