Vintage Mustang Forums banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
2,294 Posts
Discussion Starter #1
okay okay, I know, the MSD hook up is simple, i got It almost hooked up /forums/images/icons/smile.gif. Anyway, Im using a new duraspark distribuor, with the one wire connecter. I have the diagram below.... What is that thing circled in RED? I don't have one of those..... or do I just hook the red wire up to a switched 12 Volt source? Any advice appriciated, because currently the car will not start. Thanks......

http://home1.gte.net/res00w92/msddiagram.jpg
 

·
Registered
Joined
·
7,671 Posts
Red wire in question splices to the hot wire from the switch(Was to the positive side of the coil)
 

·
Registered
Joined
·
394 Posts
What they are showing there is the "horseshoe" connector that slips over the business end of the coils that are used with teh Duraspark ignition systems. It just slides over the end of the coil to make the connections instead of screw studs or Faston connectors.
 
1 - 4 of 4 Posts
Top