Vintage Mustang Forums banner
1 - 1 of 11 Posts

· Registered
Joined
·
2,374 Posts
The casting numbers show the first year that part was made, but often the same part gets used for a few years. If they made a 2V intake casting in '65, and didn't change the casting (which would change the part number) for a few years, then you can see why a "C5__" part number might be original on a block that was cast in 1967. The block part number and casting date are on the lower passenger side rear part of the block, roughly where the starter overhangs it.
 
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top