G
Guest
·Guest
Joined
·
0 Posts
what is the inside measure frame rail to rail on a 65 cpe? Mine is 28" and the m2 crossmember I just got in is 27 1/4".
need a frame measurment
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Weber carb
Vintage Mustang ForumDoes anyone have pictures on hooking up the pedal linkage on a 6 cylinder? The pedal pushes up and the carb pulls down. Any ideas?- 1
- 0
-
Adtrivett · updated
-
The good ole 289. What's it's weakness?
Vintage Mustang ForumWanted to ponder a question across you guys. (My car is at the body shop, so I'm loosing my mind waiting for it to get done) In the terms of performance from the 289, a good 4b carb and intake is a gimmie. But what's the 289 biggest weakness? My wild guess would be the heads? Just curious for...- 13
- 181
-
cturboaddict · updated
-
Filler Neck for 22 gallon tank in a 65
Vintage Mustang ForumGetting around to test fitting parts I bought in 2016. Went with an Aeromotive 20 gallon tank that's a direct fit for a 69-70 mustang. Bought the modified filler neck from CJP. This is the problem. The filler neck doesn't even get close to lining up with the tank. And it won't go all the...- 2
- 82
-
66 Convertible Top Frame - Repair or Replace?
Vintage Mustang ForumMy 66 conv top frame is in bad shape with regards to pivot points and I had just assumed I would order a rebuild kit and restore it. Well, after a bunch of research it looks like no such kit is made and that few if any bushings are made. So have to fabricate custom. I also see that I can...- 13
- 450
-
Tallguy · updated
-
T5 Neutral Safety Switch Pin
Vintage Mustang ForumAnyone know how long the neutral safety switch pin is? I have a couple of pins in my parts box and am not sure if any are correct. The T5 is rebuilt and sealed and I am concerned about inserting the incorrect pin and getting it jammed or locking up the rail. This Thing- 0
- 12
Join now to ask and comment!