Need experts on exhaust hangers for '71 | Vintage Mustang Forums

1 - 2 of 2 Posts

G

Guest

·

Guest

Joined Jan 1, 1970

·

0 Posts

Discussion Starter • #1 • Aug 14, 2002

Maybe you can help me out. I want to know if exhaust hanger, #D0OZ-5260-D for 70/71 TORINO-429 is the same kind as for 71 Mach 1-429? Here is a pic what it look like:
http://429mustangcougarinfo.50megs.com/mufflerhangers.jpg

SHELBY

·

Registered

Joined Jul 10, 2000

·

3,486 Posts

#2 • Aug 14, 2002

Ford Master Parts Book lists D1ZZ 5260 E and D1ZZ 5260 A as the ones for your application

1 - 2 of 2 Posts

Join the discussion

Recommended Reading

Will Eldelbrock Air Gap Intake #7581 on my 351w fit under a 69 mustang stock hood?

Vintage Mustang Forum

I purchased Eldelbrock top end kit #2092 for my 351w in my 69 mustang. But in reading the fine print I learned this may not fit using a stock hood on some mustang models. I called and they said the kit comes with an air Gap intake that's 5.75 height. I ask about using a dropped air cleaner, They...
- 5
- 160
- B
  BOSS980 · updated a moment ago
My AAW fusible link melted today!

Vintage Mustang Forum

More accurately, it wasn't the fusible link itself that melted - it was the connector that attaches it to the rest of the harness, which feeds the entire car. This connector has always been a little loose - there was always a lot of wiggle room even with the connector housings snapped firmly...
- 10
- 167
- Kelly_H · updated a moment ago
Keep or lose spring guard and bump stop?

Vintage Mustang Forum

Doing body work now and going to paint the engine compartment and wheel wells soon, so I’m wondering if I should remove the large panel covering the top of the coil spring? Or is that a terrible idea? I have future plans for coil overs, but for now I will just be upgrading stock style...
- 10
- 222
- ianellis · updated 22 mins ago
1967 restoration questions

Vintage Mustang Forum

Hi ! I have started restoration of 67' convertible V8 for few months. Car is complete and most of the parts are OEM :smile2:. Problem is very common... rust. I have already disassembly all items and now waiting for body man to start changing steel parts. Before he want to do sandblasting and...
- 22
- 2K
- sherif · updated 2 hours ago
Rear Axle

Vintage Mustang Forum

So I installed these new Grab a Track Springs a few years ago. I have new wheels and tires. Is it me or is the rear tire sitting to close to the front of the wheel housing? It is the same on both sides. Any suggestions will be greatly appreciated. LJ
- 5
- 203
- L
  Lawnjockey · updated 3 hours ago

Join now to ask and comment!

Top