Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part August's Ride of the Month Challenge!
1 - 5 of 5 Posts

·
Premium Member
Joined
·
595 Posts
Discussion Starter · #1 ·
I am about to continue with the wiring in my 66. I have new Classic Instrument gauges which has an electronic speedo. I am replacing all the wiring in the car with the AAW kit. I pretty much understand the other gauge hookups but I'm a little confused on the matching of the AAW gauge harness to the speedo. Has anyone done this and could provide some guidance? I called both AAW and Classic Instruments but was on hold forever.
 

·
Registered
Joined
·
1,121 Posts
Dont know what tranny you have, but you likely need an adapter converting from analog gear, to electronic pulse. Classic should have it available to purchase.
 

·
Registered
Joined
·
1,121 Posts
How many wires on the adapter, how many on the speedo? Think of it this way, at a minimum you'll have ignition power, ground, then reference trigger, light illumination on the speedo. At the speedo adapter you'll prob have power, ground, trigger for a 3 wire, or ground, trigger for a 2 wire adapter. Let us know.
 
1 - 5 of 5 Posts
Top