Joined
·
616 Posts
Where do I buy the best carpet for my 66 GT coupe.? Who makes the best product? There are so many parts places but who will give me the best deal for the best product. Any recommendations?
New Blue Carpet for my 66 GT
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Who Can Help With 1967 HIPO Motor Trouble?
Vintage Mustang ForumThe short of it: it's galling and burning rocker arms at the pivot balls. Some details: Complete rebuild by pro shop 650 miles ago Converted to mild roller cam and roller tip rockers Pretty much all new other than the cast iron bits and crank Oil pressure steady/solid 60-65lbs Plenty of oil...- 13
- 190
-
New leaf springs - before & after
Vintage Mustang ForumFinally got around to replacing my original 53 year old leaf springs and am very pleased with the outcome. After lots of research, I decided to go with the Scott Drake 4.5 leaf mid eye springs which lowered the rear an 1.5" and has the stance just right. I am running a 15" American Racing...- 0
- 0
-
68_Jcode · updated
-
1966 Mustang wont move
Vintage Mustang ForumGood morning Everyone. I have a 1966 Mustang, 289 with a 4spd Toploader with a hurst shifter. No matter what gear i put it in, my car wont move.It shifts perfectly fine into all the gears. I pulled the transmission out twice, put in a brand new pilot bearing and realigned everything. It has...- 25
- 374
-
Using original Pushrod with CSRP Disc Brake Swap 1.3/M
Vintage Mustang ForumI'm swapping the front drums with discs on my 65 Vert. I got the SWAP 1.3/M kit from CSRP. It comes with an adjustable pushrod, but was wondering if I could just use the original (as I don't believe the original has a clip to retain it and then I wouldn't have to disconnect from the brake...- 4
- 102
-
Ockbob · updated
-
How Bad is my Camber?
Vintage Mustang ForumLook at that front wheel. Is this normal? Does this mean my Shelby drop is way overdue?- 5
- 149
-
umangu · updated
Join now to ask and comment!