G
Guest
·Guest
Joined
·
0 Posts
What is a good cam that is going to give me that nice like kinda rubmle sound and give me good performance to i have a 72 v8 302 with edelbrock performer intake and holley 600 carb. thanxs?
New Cam
1 - 7 of 7 Posts
There are a ton of cams out there and picking one that's right for you is impossible without knowing what you have and what you want it to do. Your best bet is to contact one of the cam company tech lines. I think Comp Cams has a toll free 800 # for just that reason. Answer their questions and they will tell you what you need to make your car do what you want it to. Good luck.
65 FB "J" 302 lots of mods. 94 GT K&N only.
http://albums.photopoint.com/j/view?u=1590489&a=12113030&p=43871256&Sequence=7&res=high.jpg
65 FB "J" 302 lots of mods. 94 GT K&N only.
http://albums.photopoint.com/j/view?u=1590489&a=12113030&p=43871256&Sequence=7&res=high.jpg
Joined
·
4,082 Posts
Advance Auto has a Wolverine cam "Blue Racer" with a really good sound & good performance.
512 lift, 320 duraration. I have it in my '74 302 with about the same setup as yours. Cam kit, lifters & cam for $160 I believe.
Lancaster, South Carolina
66 Coupe, 302, Auto, 3.25 gears. [color:red]Candyapple Red</font color=red> with White Pearl Stripes. Cragars.
http://web.infoave.net/~ronniek
512 lift, 320 duraration. I have it in my '74 302 with about the same setup as yours. Cam kit, lifters & cam for $160 I believe.
Lancaster, South Carolina
66 Coupe, 302, Auto, 3.25 gears. [color:red]Candyapple Red</font color=red> with White Pearl Stripes. Cragars.
http://web.infoave.net/~ronniek
G
Guest
·Guest
Joined
·
0 Posts
is there a web site that i cancheck these out at did u say you got it at advance auto parts. Also will that match my car whats the rpm range for that cam thank you
G
Guest
·Guest
Joined
·
0 Posts
Check out crane cam's web site.
http://www.cranecams.com/CraneCams.htm
http://www.cranecams.com/CraneCams.htm
Joined
·
4,082 Posts
Yes Advance Auto. Don't have the rpm ratings anymore. Just go there & ask. They should have a book with all the info on the cams. When putting a performance engine together you need to "match" the performance parts to what your gonna use the car for. Example: Don't put a huge carb on a stock engine. My engine has stock pistons, that cam, dual exhaust, Holley intake & 600 carb. Pertronix ingition, Accel wires, cap & rotor. Nothing major, I just wanted a quick engine. I also added 3.25 gears to help.
Lancaster, South Carolina
66 Coupe, 302, Auto, 3.25 gears. [color:red]Candyapple Red</font color=red> with White Pearl Stripes. Cragars.
http://web.infoave.net/~ronniek
Lancaster, South Carolina
66 Coupe, 302, Auto, 3.25 gears. [color:red]Candyapple Red</font color=red> with White Pearl Stripes. Cragars.
http://web.infoave.net/~ronniek
1 - 7 of 7 Posts
Join the discussion
Recommended Reading
-
Different fuel gauges 67
Vintage Mustang ForumDoes anyone know why there are different styles of fuel gauges from 1967 or am I missing something??- 4
- 64
-
Seat Foam For Back Seats
Vintage Mustang ForumI am in the process of reupholstering the seats in my 66 convertible and I am considering tackling the job myself instead of paying someone to do the job. I have the foam inserts for the front bucket seats but it appears no one makes the rear seat foams. What have some of you done in the past...- 3
- 56
-
200ci 6 cyl carb/distributor clarification
Vintage Mustang ForumI have a 1966 coupe with the 200ci straight 6. I understand that if you have the 1100 carb with the spark control valve, then you HAVE to have the load-o-matic distributor for the proper pairing/match. If not, then it doesn’t run at peak performance. I have the spark control valve on the carb...- 8
- 148
-
MTMustangGuy · updated
-
Carb issue (maybe?)
Vintage Mustang ForumHello there, My 66 289 2bbl has become hard to start. Tried starter fluid but no help. Once it does start, it will idle rough for a minute and then just shut down. In looking at the carb, I noticed the plate is always open and has a range of just about an inch. (See pic, that is as closed as it...- 7
- 217
-
67-68 A/C Vacuum Lines Through Firewall - Seal?
Vintage Mustang ForumIs there a seal or grommet around the two vacuum hoses through the firewall for the A/C valve and vacuum reservoir (see my index and middle finger)?- 6
- 201
Join now to ask and comment!