Joined
·
6,163 Posts
One of our newest members, 67mustang coupe is my oldest son!!! Now I know I'm getting old!!!! LOL well this is just an introduction I have another one 1 year younger.
NEW MEMBER
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Tuning a Carburetor w/ a Wide Band O2
Vintage Mustang ForumI had purchased a wide band O2 sensor many months ago to get a finer tune on my Mustang. I have been running a narrow band O2 for years and figured it might be a good idea to see just how lean or how rich I was actually running when that LED light bar swung around. I finally got it installed...- 13
- 420
-
daveoxide · updated
-
Who is running 18's or larger wheels on your 65 or 66 (Pics)?
Vintage Mustang ForumI am having MTF mini-tubs installed in my 65 FB and am starting the research for new wheels/tires. I will have the original rear in the car so will be trying to get the backspace correct that will give me the widest wheel/tire setup I can put in there without rubbing...including while doing hard...- 17
- 448
-
Phydeauxman · updated
-
Engine tag location
Vintage Mustang ForumHey all, Just purchased an engine tag from Kevin Marti and was wondering where it belongs on a 69, San Jose Mach 1? I saw on a 69 351w, Dearborn Cougar barn find it was attached to the oil dipstick bolt next to the coil, see attached pic. Any ideas?? Thanks for your help.- 6
- 129
-
heavymetal69 · updated
-
$850 for a cam?
Vintage Mustang ForumMy engine shop guy is talking about a custom grind Howard cam for my 347 Stroker for about $850. That seems pretty steep. Off the shelf Howard cams for Chevy's are $650 at Summit Racing so maybe a custom grind from them does cost that much. Is it worth it? All sorts of Comp Cams, Crane, etc. for...- 20
- 569
-
crashkimball · updated
-
Broken Engine Cross Member Bolt
Vintage Mustang ForumLooking for help or advice on the best way to removing a broken engine cross member bolt on my 66 mustang.- 30
- 1K
Join now to ask and comment!