Joined
·
6,163 Posts
here it is done http://a1060.g.akamai.net/f/1060/597/30minutes/www.zing.com/picture/p1f4be09bbcbb2508dcabdaabc69f3080/febef75b.jpg done in opal frost pearl 94 mustang color John
new paint
1 - 5 of 5 Posts
G
Guest
·Guest
Joined
·
0 Posts
looks nice!!
Michelle (aka Mustang Shelly)
1968 GT 390 Fastback
Michelle (aka Mustang Shelly)
1968 GT 390 Fastback
Joined
·
4,209 Posts
Very nice! That color looks great with the black vinyl top. I can kind of see the pearl effect in the photo, but I'll bet in person, on a sunny day, that things a show stopper!
DanM
66 Coupe, check her out at http://www.66CoupeNW.stangnet.com
"Imagination is more important than knowledge. It is a miracle that curiosity survives formal education" - Albert Einstein
DanM
66 Coupe, check her out at http://www.66CoupeNW.stangnet.com
"Imagination is more important than knowledge. It is a miracle that curiosity survives formal education" - Albert Einstein
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
Low vacuum when hot?
Vintage Mustang ForumI seem to be having a vacuum issue. The car runs great during the first 30-45 mins then the steering starts to feel heavy and the brake pedal is hard to push down. Engine still feels strong and transmission shifts as it should. Power brakes and Borgensen power steering with ford PS pump. What...- 4
- 84
-
Mel_llama · updated
-
Original 66 AM radio wiring to updated car wiring?
Vintage Mustang ForumI have a original wiring 66 am radio but my car wiring has been updated, how do I hook it up??- 1
- 50
-
Stock 5.0 HO cam timing advance 4 degrees on carbed engine?
Vintage Mustang ForumHi all, I currently have my engine apart because of some head work(leaky exhaust valve). As this is being fixed I am wondering if I should advance the cam by 4 degrees or not. The reason why is that my vacuum is a bit low (15 to 16 HG)which causes the brake booster to assist less driving slow...- 0
- 0
-
richard66coupe · updated
-
COVID is killing me.........
Vintage Mustang ForumEveryone with a vintage Mustang must be working on their car. Stuff that Summit usually has in stock is back ordered up to 2 months. Im about 45 min from Summit and go right by quite a bit, so I swing in pretty often to pick stuff up. 67 Mustang MC backordered until 1 Sep. No 4100 carb...- 6
- 204
-
bmcgc · updated
-
springs for console door 64.5
Vintage Mustang ForumI need to replace the springs on my console door. I've got the screws holding the old ones in place removed but can't get the door out through the front of the opening. Do I need to take the console out and do it from the back or is there a trick I'm missing that will allow me to install the new...- 1
- 89
Join now to ask and comment!