Vintage Mustang Forums banner

41 - 60 of 91 Posts

·
Premium Member
Joined
·
2,678 Posts
this is a 69 fastback project. real solid. been off the road since 79 by the date on the back of the title. car shows 91k on the title dated 1978. odometer shows 97k on it. the underneath of the car is real nice. quarters are real decent. there is some bubbling and a few small holes. nothing that would make you replace the quarters. car is a 302 with power steering and ac. engine was redone some time ago and has been setting on engine stand for a long time and has locked up. this car was taken apart some time ago for resto but they didnt get far. interior is decent. car is grabber green with dark green interior. non folddown. will not need frame rail work or floorpan work. shock towers are nice. i have plenty of pictures available. car is located in wichita kansas. 4900.00
 

·
Registered
Joined
·
7,948 Posts
I'm moving the end of March and need to get rid of the following parts or I'll trash em ::
Steel hood
rear fold down seat parts and trim
old leaf springs
new std leaf springs (were on the car for 6 mths during retso)
gas tank
rusted rear deck lid
rear window
new poly spring perches (replaced with roller perches!!)
orig steering wheel
4 -14" cragers (crap used to roll car around)
Front bumber, front apron and grille support
rear bumper
instrument panel and gauges
and a whole trash can full of misc parts.
If it's something I won't need to finish.....It's GONE

PM me or call 785.499.5336 :D
 

·
Premium Member
Joined
·
2,678 Posts
this is a 1970 mustang daily driver. grabber green with white non fold down interior. car is very presentable with minimal rust on the car. nice frame rails. new floors, nice quarters. trunk floors are good. paint is nice. buck tag still on the car. power disc brakes, power steering, ac. currently tagged and street drive. new tires and wheels. all the glass is good. runs real good. tranny has a fresh rebuild. there is about 40k on the rebuilt motor. you could drive this anywhere. 11000.00 obo pics will be available after tomorrow
 

·
Registered
Joined
·
385 Posts
This is a 5.0 engine from a 1993 Crown Victoria with 60K miles on it before it was pulled. It was a strong running engine when removed. It is the longblock, so there's no upper or lower EFI intake, or front end (timing cover, water pump etc) or most brackets. But this has a lot of parts off of a crate 5.0 engine that I bought off a guy that didn't want all of the new parts on his crate engine. The parts include: new oil pan, oil pump, oil pickup, flywheel, water pump, timing gears/chain, dampner assembly, etc.

I'm asking $200 for the engine and all the new parts. The engine is located in Council Bluffs, Iowa. If you have any questions, email me at [email protected] or call (712) 256-1706.

Thanks!!!
David.
 

·
Registered
Joined
·
335 Posts
I am dragging them to the Woodlands swap meet this weekend.
C8AE-H Heads -Ready to bolt on - $400
1 68 Chrome valve cover - $100
4-barrel 390 intake - $75
390 Rocker shafts complete - $75 each
1 Big block exhaust manifold- C6OE 9430 A -Make Offer
351CJ+C6 for Mustang

PM Me if interested.
 

·
Registered
Joined
·
335 Posts
Ram-air Hood - fair
2 front fenders(dipped)-fair
Mach 1 grille - fair
Urethane bumper - poor
Drivers rear frame rail -original, great condition

Make me offers or PM for asking prices.
 

·
Premium Member
Joined
·
1,527 Posts
For sale: Front bench seat from '65 -- would work for '66 also since it needs reupholstered. Complete w/ seat tracks -- $100.
( 3 ) front fenders & ( 1 ) hood for '65-'66. All need work -- price negotiable once you see condition. Located in Wichita, Ks.
 

·
Premium Member
Joined
·
2,678 Posts
parting out 69 coupe. has a running 69 351w, good tranny, larger front swaybar. all front sheetmetal good, doors will need work. ac car set of new bumpers. email with needs thanks
 

·
Registered
Joined
·
8 Posts
I have a set of fenders for 71-73 in fair condition and also a set of doors, the passenger door is in fair/good condition, but driver's door is rough.anyone interested can pm me or call my cell 507.227.3385. i live in SW MN and would be interested in delivery up to 2 hrs away.
 

·
Registered
Joined
·
28 Posts
Looking for a right front fender for my 69 Mach in derby KS, is yours in good shape?

Thanks Mark
 

·
Registered
Joined
·
3,220 Posts
I'm sorry, I haven't been able to get up his way and I lost his number. I have been home only 4 days in the last 5 weeks, currently in Mississippi and hope to be home by Thanksgiving. I will make another attempt to find his number.... Ray
 
41 - 60 of 91 Posts
Top