Old board archives?
1 - 3 of 3 Posts
G
Guest
·Guest
Joined
·
0 Posts
See message a few posts below from webmaster Bob, introducing the new board.
He's on the fence. Maybe yes, maybe no.
The FAQs, nothing but the FAQs: http://www.geocities.com/a65ragtop/VM_FAQ
He's on the fence. Maybe yes, maybe no.
The FAQs, nothing but the FAQs: http://www.geocities.com/a65ragtop/VM_FAQ
Joined
·
258 Posts
My vote is to make them available.
Kevin Marti
Marti Auto Works
http://www.martiauto.com
(623)935-2558
http://martiauto.com/logos/logo_MAW.gif
Kevin Marti
Marti Auto Works
http://www.martiauto.com
(623)935-2558
http://martiauto.com/logos/logo_MAW.gif
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
enggine shuts off after reaching operating temp
Vintage Mustang ForumNeed help with my 65 mustang fsbk it has a 302 8000 miles on engine new demon carb / fuel pump, pentroneix distributor and coil car starts and run well but after it runs for a few minutes it just shuts off as if I turned the ignition off will attempt to start but wont until it fully cools...- 2
- 81
-
Engine Bay Paint
Vintage Mustang ForumI bought a couple cans of semi-gloss black for the engine bay. Semi-gloss black is getting hard to find. Now Im second guessing myself and thinking that the semi-gloss has to much gloss. I painted the dash with Krylon Satin Black and it turned out really nice. So now Im thinking the Satin...- 12
- 303
-
bmcgc · updated
-
Fender damage in shipping car - easy fix?
Vintage Mustang ForumHi all, I finally received my baby today off the back of a flatbed. Shipped from SoCal to my new home across the sea. Turns out they put a major dent in my fender and I'm pissed and very sad. I just had it fully painted before shipping it! Anywho, I'm handy and did some mechanical work...- 25
- 882
-
DoctorC · updated
-
Distributor for 302
Vintage Mustang ForumLooking for a distributor for my 1969 302. Any recommendations? Thoughts on Cardone, PerTronix, and HEI would also be appreciated. Thanks!- 9
- 153
-
Stang_Betty23 · updated
-
Under Radiator Shroud or Panel
Vintage Mustang ForumAnybody running a shroud or panel under the radiator like modern cars? I recently took out a perfectly good radiator at an autocross due to a rock getting between the radiator and engine and bouncing into the radiator and taking out 4 rows when it bounced off the fan. Maybe it was a 1 in a...- 4
- 159
-
Nailbender · updated
Join now to ask and comment!