Pacific Northwest Vintage Racing
Join the discussion
Recommended Reading
-
Hardware kits
Vintage Mustang ForumSo what hardware kits do You guys recommend and how is the quality and accuracy of these kits I saw the AMK kit but wasn’t sure about the accuracy and the quality!- 3
- 44
-
Bernnstang · updated
-
Front sway bar question
Vintage Mustang ForumI have a 1 inch front sway bar on my 66. The bolt on the lower control arm that goes through the sway bar and the sway bar are not at a 90 degree angle to each other. This is causing it to want to push the rubber insulators out. I did use the Ford style insulators, Not the hard ones that came...- 12
- 152
-
Voltage drop
Vintage Mustang ForumI have a 100 amp alternator from NPD. Charges the battery fine as I check the battery voltage regularly (12.6 volts) when the engine is off. When I idle at a stop light in gear my rpms are around 400. The voltmeter shows a drop to 12.5-13.5. If I put the car in neutral so the rpms increase to...- 7
- 92
-
DrVett · updated
-
Spindle Identification Assistance
Vintage Mustang ForumHi All, I was wondering if anyone could help identify/confirm if these are stock Mustang spindles or are they aftermarket? I'm getting ready to order a new brake kit and need to know if it's a stock mustang spindle. Thank you in advance!- 11
- 87
-
Hissing when pressing brake
Vintage Mustang ForumHello everyone! I hope everyone is staying safe and healthy during this pandemic! I have a 69 mustang and I noticed today that I had to press the brake all the way to the floor to really get the car to stop. When I listen closer I heard a hissing when pressing the brake. It sounded like it was...- 33
- 869
-
DanSchlim · updated
Join now to ask and comment!