paint color formula
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
CJ Pony getting out of Mustangs
Vintage Mustang ForumI just got an email video from CJPony that they are going all off-road and will stop selling Mustang parts. Unlike some, I've never had a problem with their service and appreciate that they carry(ied) some resto-mod items. I await the sale.- 27
- 762
-
CJM68GT390 · updated
-
Got a stuck axle...on driver side of course
Vintage Mustang ForumI got a real sonofabitch axle on driver's side of my 67 that will not come. Today's not my day it says. It just laughs at slide hammer and axle puller. Actually, the puller doesn't quite fit over all three of the lugs, I could only put it on 1 lug and tighten down well. Who makes a puller that...- 24
- 505
-
Lizer · updated
-
65 Driver Axle Issue
Vintage Mustang ForumI’m in the process of doing my winter upgrades, one of which is installing my Wilwood rear discs and e-stopp. When I measured the axle offset on each side I measured on the front side of the axle flange not thinking two things of it. Both sides measure 2.50 for offset. When the kit finally...- 12
- 537
-
sr1032 · updated
-
Cowl Vent Delete
Vintage Mustang ForumI'm a newby here so thanks for having me. I have a 1968 Coupe and having just replaced the front end with Heights Mustang II suspension and new drive train its time to do a little body and paint clean up. I've been thinking about deleting the cowl vents for a while and I think I'm heading that...- 22
- 457
-
1965 Brake Switch Wiring Question
Vintage Mustang ForumIm replacing all the wiring in my 1964.5 (289, warning lights, no air). I'm converting it from generator to alternator and replacing all the wiring with 1965 stock wiring. (The original wiring was very chopped and spliced). I've solved most of the bugs, but have a question about the brake...- 1
- 87
Join now to ask and comment!