G
Guest
·Guest
Joined
·
0 Posts
quick question, on a fiberglass hood and such, can u prime with the same primer used on the rest of the car? or is there "fiberglass primer" or something like that.
Corpus Christ TX
Corpus Christ TX
painting fiberglass
1 - 3 of 3 Posts
G
Guest
·Guest
Joined
·
0 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
T-10 Shift Options
Vintage Mustang ForumHey all, hoping to get some input here. I have a rebuilt T-10 four speed. The shift mechanism and rods are old and worn, so I'm wondering what my options are. I talked to Bill Heeley and he said he could take a look at it, but if the rods are shot, they aren't available for replacement. So--...- 0
- 0
-
alex1965 · updated
-
68 quarter skin install door gap
Vintage Mustang ForumI have been chipping away at installing a quarter skin on my 68. I have everything trimmed and fitted up pretty well but the door gap is giving me problems. It was fine and adjusted before i started this part of the project. Now it seems that the top and bottom i can slide my paint stick in but...- 4
- 128
-
69 Mustang Hood Scoop On 66 Mustang
Vintage Mustang ForumI really like the way the 69 mustang hood scoop that has the turn signals looks. Has anyone ever installed the bolt on 69 mustang hood scoop on a 66 mustang hood. If so did it bolt on flush or did you have to modify it Thanks- 0
- 0
-
Installing FPA long tube headers and engine question
Vintage Mustang ForumI am almost ready to install my 351w, it's attached to an AOD. I plan to jack up the rear of the car and install the combo using a MAC's engine pivot plate. I've got some dense foam packing I'll tape in the engine bay to help avoid scratches but I am really hoping the pivot plate will give me...- 3
- 93
-
mikec35 · updated
-
68’ Differential Housing Question
Vintage Mustang Forum8” Rear on this 68 Coupe and I was wondering if this front part of the carrier where the pinion is (smaller one with 3 bolts showing in photo) Has it’s own gasket underneath and can unbolt without taking the entire carrier and axles out. It appears it’s starting to seep a tiny bit now that...- 8
- 211
-
jsbenami · updated
Join now to ask and comment!