Vintage Mustang Forums banner
1 - 13 of 13 Posts

·
Registered
Joined
·
1,001 Posts
Discussion Starter · #1 ·
In trying to install my exhaust, I found the notch in my e brake bar will not stay in place it slides out. does this look correct?
799171
799173
 

·
Registered
Joined
·
1,737 Posts
Some of the stuff is OE others are not ? Probably the problem. Brian
 

·
Registered
Joined
·
258 Posts
Mine will do that if the rear cables are too slack.
 

·
Registered
Joined
·
258 Posts
It looks right to me but the 65 setup is slightly different where the cables attach to the adjustment/tensioner.
 

·
Registered
Joined
·
38,218 Posts
Different year but similar... Where the heck is your RIGHT cable going?


799256
 

·
Registered
Joined
·
1,001 Posts
Discussion Starter · #12 ·
In the photos it looks like both are headed to the left rear.
It's the angle! I assure you they are going to the opposite sides, but I was wondering if the solid part of the u bracket should be up instead of down. thinking that would raise that bracket maybe a touch and allow clearance for my X pipe.
 
1 - 13 of 13 Posts
Top