Joined
·
16,014 Posts
Pensacola, FL pics on Mustangworld
1 - 1 of 1 Posts
1 - 1 of 1 Posts
Join the discussion
Recommended Reading
-
1967 Rear Brake Line/Proportioning Valve Questions
Vintage Mustang ForumI replaced front brake lines and had booster, MC and distribution block professionally rebuilt. I can lock up rear drums but not front disc on an original 1967 GT fast back. So, I am guessing rear proportioning valve needs rebuild/replace as well. I bought Classic Tube set from NPD for the whole...- 1
- 79
-
Subframe connector installation question
Vintage Mustang ForumI’m going to get them welded on but have a bolt-on kit I’m installing right now. The rear is supposed to attach via a threaded hole on the rear subframe. Due to being 50 years old I assume, the holes don’t align between the connector and subframe. The subframe hole is shifted about 1/2” towards...- 5
- 169
-
COVID is killing me.........
Vintage Mustang ForumEveryone with a vintage Mustang must be working on their car. Stuff that Summit usually has in stock is back ordered up to 2 months. Im about 45 min from Summit and go right by quite a bit, so I swing in pretty often to pick stuff up. 67 Mustang MC backordered until 1 Sep. No 4100 carb...- 5
- 150
-
bmcgc · updated
-
What are these parts in my trunk?
Vintage Mustang ForumHi everyone, So I was cleaning out my trunk when I found some parts that I have no idea what they are...one looks like a piece of cardboard glued to the back of the well-liner...it is in fairly bad shape and I assume is original to the car...what is it (see first picture)? The second piece I...- 8
- 438
-
jperls · updated
-
Oil leak somewhere...
Vintage Mustang ForumHi guys, I recently noticed a pool of oil in a crevice of my engine. Last time I thought it was just coolant since its right under the thermostat housing, but earlier I accidentally dropped the napkin on the side fender after trying to soak it and it was oily! Anyway, the engine is still hot...- 14
- 365
-
mikemercado34 · updated
Join now to ask and comment!