Vintage Mustang Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,683 Posts
Discussion Starter · #1 ·
I'm replacing my power brake booster and master cylinder on my 68 FB. It has disc in front and drums in the rear.
I see two different units listed at Autozone and was wonder what the difference was between the one by Midland w/clamp band and the one by Bendix w/out clmap band.
Which is the correct or better one to use?
Thanks,
 
G

·
What type is in the car? They are functionaly the same but not truly interchangable. Replace it with the same type as you have now
 

·
Registered
Joined
·
5,368 Posts
If you have a Bendix unit it will say Bendix right in the front of the booster behind the mas. cyl. With a Bendix the two halves of the booster are crimped together, the other has a band clamp that goes around the two halves. I would bet yours is a Bendix.
 

·
Registered
Joined
·
1,683 Posts
Discussion Starter · #4 ·
Thanks for the info. I'll have to see what I have.
 
1 - 4 of 4 Posts
Top