Vintage Mustang Forums banner

1 - 3 of 3 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
How the h#@%^k to you get the PS hoses to stop leaking to the cylinder. I've tighted my new hoses to my new cylinder until blue in the face and still get a small leak. Any thoughts?
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #2
Most auto parts stores sell a non-hardening hose sealer goop that I believe is designed for this very purpose (as long as the leak isnt bad). I dont remember any brand names, but I'm sure they will at any decent store.
 

·
Registered
Joined
·
562 Posts
Mine leaked as well when first installed and I knew that the corners were going to be rounded off in no time so I used "masters metallic pipe seal" (the old stuff with the lead in it). Don't know if you can still get it (It's not that friendly (toxic)) but if you can, do. good luck. Mark.
 
1 - 3 of 3 Posts
Top