Vintage Mustang Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4,415 Posts
Discussion Starter #1
I have been working steadily to put my clone back together again. I have the brakes finished with the exception of the front parking brake cable. I will with any luck be able to start the engine sometime this weekend. Almost everything is ready with that except fro the 12v supply for the choke and the fuel line between the pump and the carb. I had been having trouble getting the outer part of the AN fitting over the cut end of the braided hose. I found using the Search functions a link to a site that had some additional instructions and tips. The use of the countersink bit to open the end of the fitting made all the difference in the world.

Here is a link to a photo that Dodgestang is graciously hosting for me. Let me know what you think. TIA Jeff

http://users.zoominternet.net/~dodgeram/hclone1.jpg

Thanks Nick for hosting the photo for me.
 
1 - 3 of 3 Posts
Top