[Guest]

Hi,
It seems like my "controlled vacuum leak" is always leaking when at idle(I can hear it hissing and if I stick my finger over the section it permits the leak, the hissing stops and engine RPMs drop some). Right now, when, when I let the clutch out, the leak slowly closes itself. But, while the leak is closing, it is difficult for me to not stall the engine. What setting(s) should I adjust to make the leak not always open and or make the leak close itself quicker when I let the clutch out?
Thanks,
Chris

 

[Guest]

I f you're talking about a vacuum leak,change the hose.
I can only guess that is the problem. Need more specifics.

Was Bob Emmerich on old forum