Vintage Mustang Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,466 Posts
Discussion Starter · #1 ·
I emailed Randall yesterday (Sat.) and I'm sure he'll get back to me soon. In the meantime, I wonder if anyone else has had a similar problem. You need to supply your own inner and outer tie rods. The kit comes with an elbow shaped adapter that fits between 81 Mustang inners and 66 Mustang outers. I need a total of approx 14 inches, but the inners recommended by Randall are WAY too long. The instructions say to cut the inners, but this is not possible because I will run out of threads. Has anyone experienced this? I bought the TRW inners because the MOOG EV 117 were not available.

http://home.comcast.net/~jim7485/tie_rod_new_web.jpg

Thanks
jim-
 

·
Registered
Joined
·
1,466 Posts
Discussion Starter · #3 ·
I have solved this problem thanks to Randall. He e-mailed me back early Sunday and offered advice plus invited me to call him to discuss which I did. We solved the problem over the phone and he even called me back to check up on the progress. I would highly recommend Randall's Rack and the owner for his commitment to the product.

jim-
 

·
Registered
Joined
·
8,022 Posts
How did you resolve the extra length issue?

John Harvey
 
1 - 4 of 4 Posts
Top