Vintage Mustang Forums banner
1 - 1 of 1 Posts

·
Registered
Current cars include 1969 Mach 1 and 1970 Cougar XR7 convertible
Joined
·
8,861 Posts
If your 67 has the short shaft steering box with a rag joint connected to the steering column shaft, it should fit. You will need to change the electrical connector for the turn signals/horn to a 67 and you may need to fabricate some of the mounting hardware for the tilt away vacuum stuff as the design was different for those years. The 67 has an actuating rod and the 69 has an actuating cable so the parts, though similar, are not identical.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top