Vintage Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2,614 Posts
Discussion Starter #1
i bought a new 3/4 rear sway for my stang today.. and its a straight bar, not the curved kind to clear the pumpkin... so im not sure exactly how to install it, it didnt come with instructions...so if anyone maybe had some pics of how to put in the str8 style rear sway , or any tips, id appreciate it a bunch.. thanks
 

·
Registered
Joined
·
325 Posts
I haven't installed mine, but it sounds the same as yours.

The ends are bolted to the leaf spring, the straight part to the rear subframe above the pumpkin.

You mount the ends onto the leaf spring, then swing it up to find the right spot to drill holes in the rear SF, using the brackets as templates.

Drill the two holes per side, slip the square U-joint through, and bolt it up.
 

·
Registered
Joined
·
2,614 Posts
Discussion Starter #3
what about the long bolt end links that came in the kit with all of those round bushings ?
 

·
Registered
Joined
·
453 Posts
Not the best of pics but see if this helps any........ http://a4.cpimg.com/image/10/84/22875664-709c-02000180-.jpg
 

·
Registered
Joined
·
2,614 Posts
Discussion Starter #5
thats perfect , thanks alot !!
 
1 - 5 of 5 Posts
Top