Vintage Mustang Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,670 Posts
I'm not sure about the 9 inches, but with the 8 inches the fill plug was on the housing through '66, thereafter it was in the pumkin. If you use a '67 & later case with a '66 and earlier pumpkin you won't have a fill plug at all (I have a '74 pumpkin with a '66 case and have 2 fill plugs). I don't see why using the vent tub wouldn't work (would probably take a while), but if you drain the rear and fill it according to the shop manual you should be fine. BTW, there are 2 pints in a quart (just did this last week /forums/images/icons/smile.gif )
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top