Vintage Mustang Forums banner
1 - 1 of 1 Posts

· Supporting Vendor
Joined
·
3,951 Posts
If you mean the stuff ford put on the cars, the only way is to scrape and wire
wheel it off. Make sure you use eye protection and a mask of some sort. You can
try some type of cleaner but it will only melt the undercoating and make a big mess.
It takes a long time. After you get it off you will have to use something to protect the
metal or it will rust. I'v herd you can get 13-15lbs of it off the cars. A heat gun will work
also but it is not a safe way to do it. It is some bad smelling stuff.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top