Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part September's Ride of the Month Challenge!
1 - 4 of 4 Posts
G

·
Discussion Starter · #1 ·
Aight guys, I'm really havin a tough time findin this out. The mustang parts guy is reluctant to tell me...I guess b/c then I won't need to buy his part, but : I really need to find out the length, thread, etc for all the bolts(except water pump, 2 bolts, found those) that are used to attach the power steering pump to the bracket/block. I can't seem to find these anywhere. Any help or links would be really appreciated. Thanks
-Ryan
 

·
Registered
Joined
·
1,728 Posts
I did this recently, and the three bolts I used to attach the head to the block were relatively short (3/4 -1") 9/16 head (so maybe a 3/8" bolt?) standard thread (24). One of these also went through my compressor bracket so it had to be longer. Same bolt size/thread as probably 60% of your underhood bolts
 
1 - 4 of 4 Posts
Top