Vintage Mustang Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,435 Posts
IIRC, once the system is put back together and bled, have someone step on the pedal, then crack a bleeder in the side opposite the one that tripped the light, i.e. if the original leak was in the rear, open a bleeder in the front. The pressure difference should centralize the sliding shaft. Been a while since I had to do this, but that's the best I can remember it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top