Vintage Mustang Forums banner

1 - 4 of 4 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
hey, is there any was that is easy to take out the rocker moulding on a 66 mustang. Any answers would be much helpful and appreciated.
 

·
Supporting Vendor
Joined
·
3,961 Posts
There are plastic clips that hold on the moulding. Pop them off the bottom
first, one at a time and the moulding will just come off the top. Be careful.
Use gentle force to undo the moulding. When you put it back on be real
careful not to push to hard or you will dent the moulding.
 

·
Gone but never forgetten
Joined
·
25,239 Posts
There are 2 nuts on each one that need to be removed ... one at the front and one at the back. You can access the nuts from the front/back wheel wells. After you have the nuts off, they just snap off.

If you always do what you've always done,
You'll always get what you've always got

http://www.classic-mustang.net/johnpro
 
1 - 4 of 4 Posts
Top