Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part August's Ride of the Month Challenge!
1 - 2 of 2 Posts

Discussion Starter · #1 ·
I was wondering if anybody has ever done this or thought about this. I have a '76 F-150 parts truck, and need a pair of seat belts for a '73 Mustang. It looks like I could unbolt the belts from the truck at three points any bolt them in to the mustang at the three normal points. This would give me the shoulder and lap belts all in one. Although it wouldn't be original, I think it would be safer. Anybody have any comments?

Gone but never forgotten
25,239 Posts
It should work just fine. When looking into putting 3 point belts into my '69, I noticed that pretty much any 3 point belt would work, it's just that many of the aftermarket ones looked cleaner when installed.

If it'll bolt in and looks ok, go for it. It should be just fine, safety wise.

If you always do what you've always done,
You'll always get what you've always got
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.