Settling a debate
1 - 5 of 5 Posts
Joined
·
578 Posts
To be exact there were 6694 69 GT Mustangs built.
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
1966 Mustang misc cleaning questions. (1969 302).
Vintage Mustang ForumHello i have some misc cleaning questions and "what to dos". 1. I have taken apart the whole engine and working on cleaning all the parts. The heads i have were super dirty and i cleaned with some P360 scuffing pads (pics below). I managed to clean them pretty good on the bottoms but not sure...- 16
- 201
-
Holley Sniper, "Educate Me"
Vintage Mustang ForumHi Guys, I'm thinking of taking the plunge & go with an EFI system, I'm looking to purchase the, Holley 550-511K Sniper EFI Self-Tuning Master Kit This will be fitted on my 68 fastback with the 351c, Full MSD ignition, long tube headers, edelbrock torker 351 (2760). Comp Cam 32-225-4. what...- 20
- 640
-
belky · updated
-
289 Idle Help!
Vintage Mustang ForumHello all, I recently got my engine broken in, and have been working on getting it to idle-- however, I'm having trouble with this. I had the engine between 2,000 and 2,500 RPM for break-in, but when I fire it up and try to get it down to under 1,500 or so, the engine sputters out and dies...- 11
- 147
-
alex1965 · updated
-
1970 H-Code Windsor or Cleveland
Vintage Mustang ForumI have a 70 Mach 1 (H-Code) that came with a 2bbl 351 Windsor, that I always assumed was the stock motor. The number on my block (above the starter) indicates it is actually a 1971 engine block. My car was ordered on 1/20/1970, and built on 2/11/70. We all know that some early 70 H-Code...- 6
- 176
-
Engine Will Not Run
Vintage Mustang ForumStock 1968 Mustang 289 V8 engine stalls after getting to about 175 degrees. With ignition key in run position, battery connected, coil red/green + wire disconnected from coil, I measure 12.5 volts across red/green wire and battery negative post. Is this correct? I thought I would measure...- 49
- 2K
Join now to ask and comment!