shaker seal
1 - 5 of 5 Posts
Randy
No one is currently reproducing the C9ZE Shaker seal, unless you are referring to the Australian shaker seal which will not work on original Ford shakers...
When the "nice" originals pop up on Ebay, they have been priced at 150 bucks or better lately....
randy
http://www.bossman-motorsports.com/bossbanner2.gif
http://www.bossman-motorsports.com
No one is currently reproducing the C9ZE Shaker seal, unless you are referring to the Australian shaker seal which will not work on original Ford shakers...
When the "nice" originals pop up on Ebay, they have been priced at 150 bucks or better lately....
randy
http://www.bossman-motorsports.com/bossbanner2.gif
http://www.bossman-motorsports.com
G
Guest
·Guest
Joined
·
0 Posts
Ford had stock in the shaker seals when I bought mine; part number "C9ZZ-9B624-C" and the price was $43.00 cdn.
7TFord.
7TFord.
Randy
If I am not mistaken (and I don't think I am), the shaker seals the two posters above are referring to was the last run by Ford which is absolutely garbage. It is very flimsy, cut wrong and VERY ill fitting. I have one of them and if you want, you can have it for FREE - not a piece you want to put on your pride and joy. That is why the old style seal is going for so much. BUYER BEWARE....
randy
http://www.bossman-motorsports.com/bossbanner2.gif
http://www.bossman-motorsports.com
If I am not mistaken (and I don't think I am), the shaker seals the two posters above are referring to was the last run by Ford which is absolutely garbage. It is very flimsy, cut wrong and VERY ill fitting. I have one of them and if you want, you can have it for FREE - not a piece you want to put on your pride and joy. That is why the old style seal is going for so much. BUYER BEWARE....
randy
http://www.bossman-motorsports.com/bossbanner2.gif
http://www.bossman-motorsports.com
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
1966 Fastback changing firing order to 302HO/351W order
Vintage Mustang ForumI Have a 1966 fastback with a 68 302 block edleblock heads,i decided to go with a paradise wheels paxton supercharger and the flowtech inductiion ed Curtis Custom Grind camshaft kit, I notice its going to have the 302HO/351W order , Before all this i bought a Davis Unified Duraspark Distributor...- 4
- 98
-
Subframe connector installation question
Vintage Mustang ForumI’m going to get them welded on but have a bolt-on kit I’m installing right now. The rear is supposed to attach via a threaded hole on the rear subframe. Due to being 50 years old I assume, the holes don’t align between the connector and subframe. The subframe hole is shifted about 1/2” towards...- 6
- 184
-
4 lug Scarebird disc brakes
Vintage Mustang ForumHell, Just wondering if anyone on this site uses or have used Scarebird disc brake conversion on their 6 cylinder Mustang. I am thinking of doing this, but have questions about if the stock 14 inch steel wheels will clear the calipers. The Scarebird site states if the offset is more than 3...- 6
- 108
-
Intake manifold options
Vintage Mustang ForumHI Situation : 66 HT 289 2100v stock. I have a 68 302 4BBL intake and newer 600 cfm Holley carb. Do I purchase an aluminum intake or use the old one? If I replace the intake which do you recommend. O- 9
- 212
-
oscarnielsen · updated
-
I cut my losses and found a local shop to do my brakes after wayyyyyyyy to much failure.
Vintage Mustang ForumI found out the last few days its really tuff to find a shop that will agree to work on a classic. When I was working on my brakes changing to new lines and wheel cylinders I decided to upgrade to the dual master cylinder and My troubles started. My master cylinder that I was sent did not work...- 15
- 447
Join now to ask and comment!