G
Guest
·Guest
Joined
·
0 Posts
I need the whole interior for a 70 convertible. I mean everything. Has anyone compared prices from the various suppliers? Anyone have a package deal? Thanks for any help!
SHOPPING FOR BEST INTERIOR DEAL. SUGGESTIONS?
Join the discussion
Recommended Reading
-
Roller cam conversion kit
Vintage Mustang ForumI'm in the process of restoring my original 289 in my 66. Thinking seriously about converting to a roller cam. Has anyone done this conversion? If so what kit did you use? I am looking at the kit from summit K31-422-8. Any suggestions? I'm running with a 4 speed top loader and a 8" 3.00 in the...- 10
- 222
-
Headrests for '68 lowback seats
Vintage Mustang ForumI want to add head rests to my seats. Does anyone have experience finding headrests and mounting hardware for ’68 standard low back seats. NPD and CJP have different headrests for 65-67 (two post) and 69 (one post). Which would be correct?- 13
- 1K
-
CJM68GT390 · updated
-
67 Brake Warning Light Wiring Help
Vintage Mustang Forum@Midlife I purchased the color wiring diagrams for my 67, and I have found a few odd inconsistencies. Below i will try to isolate one issue I have found as I am trying to sort through the wiring on my gauge cluster. (standard non tach). Looking at the Car (under-dash) side of the harness...- 9
- 144
-
caveeagle · updated
-
Engine cradles and stands FE / 390
Vintage Mustang ForumHi everyone. I'm new here and wanted to get advice on where to get a simple engine cradle or stand that would fit a 390. I'm not building the engine myself so it doesn't need to be elaborate. The main purpose is to get the engine onto a stand that can be used to store and transport the engine...- 6
- 167
-
Yep another reverse water pump question!!
Vintage Mustang ForumOk I'm working on a 5.0 HO motor to go into a 65 and its a question of serpentine or v belts. I want to run ac and power steering. The question is why would an efi timing cover need to have a reverse water pump? I saw one of the early covers on a chart and circled it. Totally agree the port is...- 0
- 0
-
fastback40 · updated
Join now to ask and comment!