Vintage Mustang Forums banner

1 - 9 of 9 Posts

·
Administrator
Joined
·
19,476 Posts
Discussion Starter #1
List any parts that you're looking for in this thread. Same rules as in the parts for sale thread. ;)
 

·
Registered
Joined
·
471 Posts
10/16/07 05:50 PM - Post#1760318

Need help here, Need 65-66 Passenger side outer louver for a Fastback. (the pot metal one) I had a cracked one, bought one and it turned out to be cracked,tried to have it repaired and failed misserably. So let me know what you got.

Thanks Scott
 

·
Registered
Joined
·
216 Posts
Are you talking about the aluminum (silver colored) hockey stick trim pieces on the side of the seat? I may have one. Can you send a picture or attach one to photobucket so I can see it. I'm not sure what the difference is between the coupe and fastback versions (for this piece). I thought only the backseats were different between the body types, not the front seats.
 

·
Registered
Joined
·
1,952 Posts
Long shot, but I am looking for an 8 inch rear end from a 65-70. Phoenix/Tucson area only.Well, maybe Prescott. But not more than a 2 hourish drive from West Phoenix. Needs to be extremely cheap or free, I am currently unemployed. :-(
Any gearing, or even a bare housing, or something in between.
I have a 74 Pinto wagon project now (don't laugh)( :) ) and I want to put an 8 inch in it, and those years will work without major mods.
Thanks,
Russ
 

·
Administrator
Joined
·
19,476 Posts
Discussion Starter #6
I have a set. They originally were on my 68 fastback, and have only a couple miles wear on them. It includes all parts, even stainless steel brakelines. They were removed a couple years ago when I put Baer brakes on. They've been in storage since then.

I can post a picture later. I'm asking $100 per wheel.
 

·
Registered
Joined
·
13 Posts
70 high back buckets

I'm looking for some 70 high back seats. take trips from el paso to phoenix every now and then. If anybody comes across any can you give me a HOLLA!! Thanks
 

·
Registered
Joined
·
255 Posts
I am on the hunt for a 275/40/17 for test-fit purposes. Obviously, I’d prefer something in the Phoenix area to prevent the need for shipping. Worn out is preferred, I just need it for measurements. It would seem that I’m not having any luck with the local tire shops.
Contact me via PM if you have any info.
Thanks
 

·
Premium Member
Joined
·
1,543 Posts
Looking for a few things. Convertible rear seat. 17" wheels and tires just to move the car around don't care if they are beat up and the tires are bald, need 17's to clear my brakes. 9" gears either 3.50 or 3.73. and other stuff but I'll start with that. Would prefer local just to avoid shipping cost on the bigger stuff. Thanks.
 
1 - 9 of 9 Posts
Top