Spell Checker
1 - 3 of 3 Posts
Joined
·
289 Posts
Yeah, I posted that back on 3/20/01 kinda weird, it still bugs me.
The worst is it accepts the spelling Chevrolet, Buick, Oldsmobile, Cadillac, Suburban, and even Yukon. This is embarrassing, the official VMF spell checker doesn't know how to spell Mustang. Well, it's no wonder it also does not know how to spell VMF!
Russ
http://albums.photopoint.com/j/View?u=1595962&a=12199293&p=44747301&Sequence=1&res=high.JPG
Russ
http://albums.photopoint.com/j/View?u=1595962&a=12199293&p=44747301&Sequence=1&res=high.JPG
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Fender ID
Vintage Mustang ForumI have a 6cyl Ford Mustang convertible assembled at Dearborn MI in February 1965. The Left fender is stamped with a triangle and 2 01 D3 on top. The Right fender is stamped 6330 D? on the top and in two sections towards the rear stamped 5 27 2D and 5 27 D2? Would these be original factory...- 4
- 150
-
Mike Tyne · updated
-
1965 GT FB Power Steering Whine Issue - Fluid?
Vintage Mustang ForumThought I'd try here, didn't see a post specific to this. I've got a '65 GT FB that's pretty well optioned. Keeping it as original as possible. Over the past year I've worked to resolve some PS issues and have replaced the hoses and PS pump, serviced the rack etc. The problem I'm having is...- 6
- 112
-
jescott922225 · updated
-
Going rate for paint job?
Vintage Mustang ForumWhat can one expect to pay (roughly) to remove glass, front clip and trim. Prep for paint with blocking/priming for base coat/clear coat, Assume with minor body work and rust, what would the levels look like: Budget: Nice driver: Show:- 28
- 720
-
its been a long time.
Vintage Mustang ForumWell it has been a very long time since i've been on here and i have done a lot of work to my mustang since then. A lot being done since the corona virus and quarantine. I have spent the last 7 years working on my engine bay. I just finally got it finished up. I installed new brake lines, did...- 1
- 105
-
Master Cylinders - Disc and Drum
Vintage Mustang ForumIn between the heat/humidity/rain and BBQ today, I worked on a bunch of odds and ends. One of them being painting the new brake booster and rounding up all my brake parts. My 67 has 4 wheel power drum. Everything on each corner is new except I reused the backing plates, hubs and front drums...- 5
- 127
-
bmcgc · updated
Join now to ask and comment!