Spintech Mufflers?

1 - 1 of 1 Posts

roadracer

Registered

Joined Mar 7, 2001

3,894 Posts

Discussion Starter • #1 • Mar 27, 2001

Does anyone have experience with Spintech Mufflers?

If so, which model?

http://home.netcom.com/~jonescha/Photos/DCP_0355_178x109.jpg
"If you're under control you're not going fast enough"
Parnelli Jones
Try my website

1 - 1 of 1 Posts

Recommended Reading

Best way to cut Quarter Panel?

Vintage Mustang Forum

In the next week I will be cutting my quarter panels where the red line is in the picture. My issue is that I need a way to draw a line on the old panel and new panel in the same place to get a good fit. First I thought to make a molding out of plexiglass but I couldnt find a sheet thin enough...
- 27
- 541
- GOAT69 · updated a moment ago
Got my T5!

Vintage Mustang Forum

Well after lots of searching, want adds, bartering, "horse trading" I finally have a T5 to put in my car. I'm into it for $150 CAD ($110 USD) From all the research I did this will work fine for my "stockish" Sunday driver car. 1968 mustang 289, 3 speed. I will use my existing clutch and...
- 24
- 419
- Stangfire · updated a moment ago
What's in your stable?

Vintage Mustang Forum

I've often wondered what the statistics are as far as year and body style ownership around here. You can make multiple selections, and if you have multiples of one, I suppose it'd be best to just post up and say so. Please limit it to what you presently have. My guess is that 65-66 coupe will...
- 61
- 2K
- BlakeTX · updated 22 m ago
Bleeding brakes. Frustrated, got to vent.

Vintage Mustang Forum

So I'm trying to bleed my brakes after replacing my master cylinder. I got a 65 6 cylinder with four wheel drums. I've gone around the car 5 times trying to get the brakes bled. I'm doing it with my wife doing the press, open, close, release method and got out all the big bubbles I could see...
- 17
- 429
- O
  oldpaint · updated 25 m ago
Tips for Rolling Fenders? / Rubbing would be an understatement!

Vintage Mustang Forum

Over the weekend I had a bit of unexpected fender rubbing when turning through a sharp dip and rise in a parking lot. Needless to say a few expletives were flying out of my mouth. Fender = screwed up and brand new tire = wasted. I am partly blaming this on the older Golden Legion, at least...
- 39
- 1K
- tx65coupe · updated 27 m ago