Vintage Mustang Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter #1
I need to replace the springs on my console door. I've got the screws holding the old ones in place removed but can't get the door out through the front of the opening. Do I need to take the console out and do it from the back or is there a trick I'm missing that will allow me to install the new springs from the front with the console still in place?

Any help would be appreciated.

Glenn
 

·
Registered
Joined
·
133 Posts
I replaced mine but had the back off. I don't know if you can fit the door through the front. With any luck NEFaurora (Tony) will chime in. The man is like a Mustang encyclopedia. Mel
 

·
Registered
Joined
·
26 Posts
Discussion Starter #3
Thanks Mel. Much appreciated. I’ll see if there is any more feedback today and if not I guess the console comes out tomorrow.

Glenn
 
1 - 3 of 3 Posts
Top