Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 7 of 7 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
I have owned this Mustang since 1973. The car has had three different reworks in its life. The last was as a autocross car in the late eighties. I have been gathering parts to start the build to run in the SCCA Cam series. The engine is a modified 302 with a Toploader 4speed. Hurst competition shifter.
A new 9” 3.50 rear with an eaton locker and Wilwood discs in the back. Older front SSBC discs.Front sway bar. Montycarlo bar and export brace. New 5 leaf grab a track springs. Rear sway bar. The frame rails are connected. The car has a four point roll bar.
Waiting to go in:
A coil over front suspension.
Rack and pinion manual steering.
Fuel safe cell.
On the books to purchase:
Watts link or Panhard bar, undecided as yet.
17” wheels as there a no good tyres to be had in 15”. Will stick with Torque Thrust D.
Better seats, the car only has fronts.
New paint, the body is in very good shape.
* yes the bay is a mess but things will get cleaned up before starting work.
745077
 

·
Registered
Joined
·
1,201 Posts
Sounds like your car has has a good life :) Looks like you have everything covered. Don't know you bought wheels yet but I have a set of new 17x8 Torque Thrust II in PVD sitting in my warehouse gathering dust. They were too big for my 66 convertible.
 
1 - 7 of 7 Posts
Top