Vintage Mustang Forums banner
1 - 1 of 9 Posts

· Registered
650 Posts
The C5 part# panels are made of a totally different fibreglas than the C6 panels.
My experience is that The C5's can be stripped with the Circa 1859 gel stripper. Left on for a few minutes, scrubbed with a plastic brush and rinsed. Totally clean panel with no damage.
Every effort I made on the C6 panels resulted in the brittle fibreglas falling apart. I'd say the color is IN the surface of the panel.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.