Suggestions for fuel line

686 Views 4 Replies 4 Participants Last post by red66, Apr 17, 2001

basketcase

Discussion Starter · Apr 16, 2001

I would like to know the best solution for a new fuel line setup from the pump to carb. I recently went from stock to an edelbrock intake and carb setup. The fuel line now enters on the right side of the carb and the filter must be attched inline instead of on the carb. Please give me some suggestions for a nice clean look and a way to keep the fuel cool at is now takes a longers trip over the intake. Is it easy to bend my own lines or should I use the existing line and connect to it somehow?

Dave
Reading PA
66 Signal Flare Red Vert
302 2V, 15X7 Cragar SS's with 205/60s

Save

1 - 1 of 5 Posts

Jay

· #4 · Apr 16, 2001

The Aluminum line that Summit sells is cheap and very easy to bend up in any path you want. And you can get it in larger sizes to complement your system better (of course your sender will be a bottleneck unless you upgrade that too).

I ended up running 8AN braided line from tank to carb after I installed the Fuel Cell ... excellent stuff but the fittings alone will break some people's budgets.

[email protected]
1967 351W Convertible
2000 Mustang GT

Save

1 - 1 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month