T Shirts?
1 - 4 of 4 Posts
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
5.0 rear main seal
Vintage Mustang ForumI've received a number of parts for my 5.0 install but have yet to get the FelPro gasket set. I don't know what main seal (or even how many types there are) will be included. But I do know that for an engine that's been sitting for a while it would probably be wise to install a new one while...- 1
- 25
-
rose62 · updated
-
Crow's foot flare wrench for the win
Vintage Mustang ForumGetting the brake lines sorted on the 65 meant getting the rear most line on the bottom of the distribution block loose. The regular flare wrench was unable to assist as there's not enough room for the tool there. So I bought the crow's foot flare wrench set from Northern. Verified rotation...- 6
- 190
-
ylexot · updated
-
Stainless Steel air cleaner mounting stud and nut
Vintage Mustang ForumDoes any company make a stainless steel version of the stock air cleaner mounting stud and wing nut which looks like the original? Something like this but in stainless? https://www.npdlink.com/product/mounting-kit-air-cleaner-2-383-inch-over/107219/200947- 0
- 16
-
mustangtyson · updated
-
My AAW fusible link melted today!
Vintage Mustang ForumMore accurately, it wasn't the fusible link itself that melted - it was the connector that attaches it to the rest of the harness, which feeds the entire car. This connector has always been a little loose - there was always a lot of wiggle room even with the connector housings snapped firmly...- 11
- 642
-
Kelly_H · updated
-
“Hidden” or massless antennae?
Vintage Mustang ForumHey everyone. So I was planning to weld up the antenna hole for a clean looking fender, but now I’m having second thoughts because I do like to use my radio for actual FM music... but then my body worked uncharacteristically fast and welded up the hole before I got a chance to tell them not to...- 4
- 71
-
ianellis · updated
Join now to ask and comment!