Vintage Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
When putting a T5 in a 65, does the shifter come through the original hole in the tunnel, or do you have to relocate the hole?
 
N

·
Guest
Joined
·
0 Posts
It will come up near the stock hole. I trimmed a little bit of the floor so I had access to the shifter bolts. If you bolt the shifter on before you install the tranny you can probably avoid this. HTH
 

·
Premium Member
Joined
·
2,559 Posts
I had to trim mine. No big deal and it did make removing and installing the shifter much easier.
 

·
Registered
Joined
·
4,092 Posts
I found my old T-5 came up through the original shifter hole, but slightly to the right. A little trimming was in order.
 
1 - 5 of 5 Posts
Top