test-finally got it right!
Join the discussion
Recommended Reading
-
How do those cap type tail light plugs actually work?
Vintage Mustang ForumI got new everything when I was putting that all back together and spraying the inside of the trunk. The wiring harness is metal alloy even. Suddenly out of nowhere my left side brake/turn signal went out. Also have a new turn signal switch and harness. I already checked and even swapped...- 1
- 32
-
macstang · updated
-
Show me your trunk!!
Vintage Mustang ForumI'm looking for ideas to spruce up my bare metal trunk. I'm not keen on dropping 500 bucks for the plastic and fabric MTF kit, so I'll make my own. No tire in there for me =) BTW, anybody have suggestions of what carpet to use? I'm thinking plywood core panels wrapped in carpet ... unless you...- 48
- 2K
-
DoctorC · updated
-
My brake light switch came off
Vintage Mustang ForumI need that clevis pin, spring clip, cotter pin, hair pin or what? that holds the brake light switch on the stud on the brake pedal arm(its an automatic). I don't know exactly what its called though so I can't find it. That is what was on mine when I took it all apart anyway and it was a...- 5
- 218
-
macstang · updated
-
Roadtrip!
Vintage Mustang ForumHi Everyone, I've been reading a lot more than posting for the last few years, but that might change a bit considering my current undertaking. I'm roadtripping across the USA in my '69 Cougar. For those who don't know, the Cougar is basically a Mustang with different sheetmetal and a 3" longer...- 29
- 717
-
1968 Coupe Hazards not flashing in rear
Vintage Mustang ForumHello! I have encountered a small issue as of today, I normally check my lights before going out and I put on my hazards, they flash in the front, the hood scoop, the gauges but they aren't flashing in the taillights. When I step on the brake they go solid so obviously my brake lights are...- 15
- 182
-
SuperFrankieOSX · updated
Join now to ask and comment!